| Customization: | Available |
|---|---|
| After-sales Service: | with After Sales Service |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Truck Specification | ||||
| Chassis model | BJ5182GSS-1 | |||
| Cab | Foton one and half row cab, with power steering,with a/c | |||
| Driving Type | 4*2 Left hand driving | |||
| Max Speed (km/h) | 90 | |||
| Overall dimension(mm) | 8110x2500x3160 | |||
| GVW( kg) | 18000 | |||
| Mass in working order ( kg) | 7004 | |||
| Wheelbase(mm) | 4600 | |||
| F/R track base (mm) | 2010/1865 | |||
| F/R overhang (mm) | / | |||
| Approach/Departure Angel | / | |||
| Tire | 6+1/11.00R20 | |||
| Clutch | Single-plate dry diaphragm spring clutch φ430 | |||
| Steering | Hydraulic steering with power assistance AM75L | |||
| Gear box | 9JS119T-B(Q) 9-speed | |||
| Bridge | Front axle | / | ||
| Rear axle | 13T | |||
| Engine | Model | WP10.270E32 | ||
| Fuel Type | Diesel fuel | |||
| Type | Water-cooled, four-stroke, with exhaust valve brake, direct injection, supercharged and inter-cooled | |||
| Exhaust(ml) | 9726 | |||
| Max output power/rotate speed (hp /rpm ) | 270/2200 | |||
| Max torque/rotate speed(N.m/rpm) | 1100/1200-1600 | |||
| Braking system | Service Brake | Double loop pneumatic drum | ||
| Park Brake | Energy storage spring cut-off brake | |||
| Auxiliary brake | Engine exhaust brake | |||
| Eletric system | 24v | |||
| Upper-Body specification | ||||
| A.TANK BARREL | |
| 1. Tank Profile | Round shape |
| 2. Test pressure | Hydrostatic test to5 psi (35 Kpa) on each compartment. 5pas (35Kpa) |
| 3. Working pressure | Atmospheric. |
| 4. Capacity | 10000L plus 3~5% ullage. 10000L+3-5% |
| 5. Compartments | Single compartment. |
| 6. Interior weld finish | Not polished or grinded (W-0). , |
| 7. Exterior weld finish | Not polished or grinded (W-0). , |
| 8. Shell material | Stainless steel 304 2B. 304 2B |
| a) Top | 3.7mm nominal. 3.7mm |
| b) Sides | 3.7mm nominal. 3.7mm |
| c) Bottom | 3.7mm nominal. 3.7mm |
| 9. End Plate | Stainless steel 304 2B, 3.7mm nominal. 3.7mm |
| All single heads dished and flanged. | |
| 10. Bulkhead | Nil. |
| 11. Baffle / Surge Heads | Stainless steel 304 2B, 3.7mm nominal. 3.7mm |
| Dished with flap. | |
| 1 pcs.1 | |
| 12. Spill molding and rollover protection | Stainless steel around the dome with drain hose. |
| 13. Spill molding lids | Nil. |
| 14. Outer rings | 304-2B stainless steel, 60mm height, 3mm nominal, continuously welded. 304 2B, 60mm,3mm, |
| 15. Frame | Carbon steel independent. |
| 16. Loaders and brackets | Carbon steel. |
| 15. Isolation | Nil. |
| 16. Exterior lining | Nil. |
| B. TANK FITTINGS AND PIPING | |
| 1. Manholes | 20" diameter with 6 stainless steel wing nuts, located at the top center |
| 1 pc. 2061 | |
| 2. Pressure Vacuum Vent | Two per compartment. 6~12 kPa pressure, 2~4 kPa vacuum. |
| 2,6~12 kPa , 2~4 kPa | |
| Chinese Brand | |
| 6.Foot valve | Nil. |
| 7. Discharge system | 3" diameter discharge with 3" diameter butterfly valve, 3" stainless steel male camlock coupling and quick cap, located at the back of the tank. , |
| 8. Piping | Nil. |
| 9. Thermometer | Nil. |
| 10. Steam trace | Nil. |
| 11. Overfill Prevention | Nil. |
| 12. Tow Hook | Nil. |
| 13. Product Indicators | Nil. |
| C. ACCESSORIES | |
| 1. Ladder | Stainless steel, 400mm wide, with non skid rungs and lateral handles, mounted at right middle of tanker. ,400mm, |
| 2. Walkway | Extruded aluminium around dome. |
| 3. Hose Carries | 1 no, hose carrier (round tubes) to fit Ø159 x 6meter (236") hose close type complete with brackets to be installed at the right side. |
| 4. Hose | Firemen type flexible discharge hoses, 30m 3" for discharge. and flexible plastics suction hoses, 5.9m 3"for suction, 3" female camlock coupling at both ends. 3,30 |
| 5. Motor Pump | BRIGGS & STRATTON Gasoline motor , 4 stroke motor, fuel tank capacity 4.0 liters of gasoline, WB30 pump with a 3" input and outlet diameter, 7m suction head, discharge capacity 900L/min (238Gal/min) pump head pressure 33 m, weight 30kg. +WB 30 |
| 6. Toolbox | Nil. |
| 7. Rear Bumper | Aluminium member to accommodate light assembly and number plate to cover full width of the tank. ,. |
| Steel bumper with ground clearance 500mm approx. | |
| 500mm | |
| 9. Hazchem Plate | Nil. |
| 10. Mudguard | Aluminum over suspension and the upper coupler. |
| Mud flaps rigid plastic at the rear. | |
| 11. Lights & Wiring | 24V. ISO 1185 7 pin socket. 24,ISO 1185 |
| Harness: oil and vapour proof cable. | |
| Front: nil.: | |
| Side: | |
| Mark lamp 3Pcs/side, LED.3LED | |
| Reflector 3Pcs/side 3 | |
| Turning lamp 1Pcs/side, LED.1 | |
| Rear Bump: | |
| Reverse lamp R-L 2Pcs. 2 | |
| Turning lamp R-L 2Pcs. 2 | |
| Brake lamp R-L 2Pcs. 2 | |
| Register plate light | |
| Rear top: YES. : | |
| Brand of Wiring: Phillips | |
| : | |
| 12. Reverse alarm | Nil. |
| 13. Connector Box | At the center in the front dishend |
| 14. Sticker | 50mm wide red-white reflective sticker, mounted at both sides and rear bump. 50mm |
| 15. Hand rail | Nil. |
| 16. Fire Extinguisher | 8kg , 2Pcs. 8 |
| Carbon steel extinguisher holder located on the landing gear on the curb side. | |
| 17. Drains hose | water drains hose 2", installed at the back of spill molding2 |
| 18. Wheel chocks | Nil. |
| 19. Traffic cone | Nil. |
| 21. Spare wheel bracket | 1set, |
| Carbon steel, basket type, located behind the landing gear. | |
| 21. Painting | Polyurethane medium Aluminium gray, applied over epoxy primer on carbon steel elements, |
Tanker Truck / Trailer Series:
LPG, Oil, Chemical Liquid, Water, Milk, Cement Powder
Sanitary & Cleaning Truck Series:
Sweep Truck, Garbage Truck, Sewage Suction Truck, High Pressure Cleaning Truck
Box Truck Series:
Refrigerator Truck, Van Truck, LED Van Truck
Engineer Truck Series:
Dump Truck, Crane Truck, Concrete Mixer Truck, Concrete Pump Truck
Operational Truck Series:
High Altitude Operation Truck, Wrecker Truck, Fire Fighting Truck
){kind=link}