Dongfeng Kingrun Verge Clearence Truck Hedge Trimmer
Applications:
The vehicle is mainly used for pruning and crushing tall branches in landscaping, electric power and other departments, and pruning of national roads and high-speed green belts, which greatly improves work efficiency and solves the problems of slow speed and low safety factor caused by manual pruning. Garden branch pruning, smashing and transportation are integrated, it is a service for urban emergency (typhoons, broken branches after storms and snow), and it is also a special vehicle for urban and rural greening and gardening.
Scope of work:
A compound trimming arm with outriggers is mounted at the rear of the cab, and an azimuth-adjustable compound rotary cutter head is mounted at the front of the forearm. The cutter head and the blade can be rotated at the same time, and the large and small branches within the scanning range of the cutter head can be trimmed cleanly. Shredding various garden branches, fruit tree cuttings, wooden crop orange stems, and garden waste with a diameter of less than 20CM.
Product specification:
Special Function |
Power arm |
Max height |
12m |
Max trimming height |
11m |
Double saw blade compound rotary tool holder |
model |
2*400-1600 type |
Structure type |
Double saw blade compound rotary tool holder |
Blade type |
400mm Steel Woodworking Circular Saw Blade |
Number of blades |
2 |
main motor power |
2.2kw |
Tool shaft speed |
2880rpm |
Tool holder speed |
≤100rpm |
Maximum trim diameter |
≤100mm |
Scan width |
1600mm |
Straight knife holder |
model |
3*180 type |
Structure type |
Single motor three-axis in-line inclined |
Blade type |
2*650mm+570mm straight knife or diamond knife |
Number of blades |
3 |
main motor power |
3kw |
Tool shaft speed |
2880rpm |
Scan width |
1800mm |
Grinder |
model |
DF900 |
Power |
55kw |
Output |
3000-4000KG |
maximum crushing diameter |
200MM |
Body configuration |
The oil cylinders of the whole arm are all controlled by proportional valves, and the oil pressure and flow of each circuit can be individually adjusted through the man-machine interface to achieve precise control. The rear of the trimming arm is a silo controlled by the oil cylinder to close the silo door. Behind the silo is the crushing box room. The feed port of the crusher is on the right side of the vehicle body, so that the branches can be easily taken during crushing. The automatic feeding of the crusher The system consists of a hydraulic motor, a feeding roller and a controller. When the speed of the crusher reaches the set parameters, the feeding roller will rotate, and the branches will be put into the feeding port, and the branches will be automatically sent to the crusher. , and then the scrap will be blown into the silo by the fan through the discharge port for storage; |
Production equipment (part)
Bulk orders
WELCOME TO VISIT US! WECLOME CUSTOMIZED DESIGN!
THERE ARE MANY DIFFERENCE DESIGN AVAILABLE!
Feel Free To Contact Us To Get More Information!
Robert Dai
Sales department (7/24/365)
CHENGLI SPECIAL AUTOMOBILE CO., LTD
Web:clvehicles.en.made-in-china.com
Factory Add: South Suburb, Chengli Automobile Industry Park, Suizhou City, Hubei Province, China