Customization: | Available |
---|---|
Type: | Fire Truck |
Certification: | ISO9000, CCC, TS16949, EPA, EEC, RoHS, CE |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Chassis Specification | ||||||
Truck model | CL5140GXFQ2 | |||||
Cab | ISUZU one and a half cabin, Left hand driving | |||||
Driving Type | 4*2 | |||||
Max Speed (km/h) | 100 | |||||
Overall dimension(mm) | 7915×2500×3600 | |||||
GVW( kg) | 14100 | |||||
Mass in working order ( kg) | 13950 | |||||
Wheelbase(mm) | 4500 | |||||
F/R track base (mm) | 1960/1855 | |||||
F/R overhang (mm) | 1335/2080 | |||||
Approach/Departure Angel (°) | 15/13 | |||||
Tire | 1100R20 | |||||
Clutch | Single-plate dry diaphragm spring clutch | |||||
Steering | Hydraulic steering with power assistance | |||||
Gear box | 9JS119TA,9-speed | |||||
Bridge | Front axle | 6.3T | ||||
Rear axle | 13T | |||||
Enging | Model | 6HK1-TCSG40 (EURO IV) | ||||
Fuel Type | Diesel fuel | |||||
Type | Water-cooled four-stroke,, direct injection, turbocharged | |||||
Exhaust(ml) | 7780 | |||||
Max output power(hp) | 280 | |||||
Max torque(N.m) | 883 | |||||
Braking system | Service Brake | airbrake | ||||
Park Brake | Spring energy | |||||
Eletric system | 24v | |||||
Upper-Body specification | ||||||
Tank |
Structure | Welding, there is clapboard inner. | ||||
Material | High quality carbon steel plate, anti-rust treatment | |||||
Capacity | Total | 8000L | ||||
WaterTank | 5000L | |||||
FoamTank | 3000L | |||||
Equipment box | Equipment box: at the back of carriage, there are two-layer clapboard, can store equipment. There is safe ladder to up and down on the back of equipment box. Structure: whole frame is welded to ensure intension and rigidity. Material: frame is high quality steel, inner plague is aluminum embossed sheet, surface is anodic processed. |
|||||
pump room | on the rear or central of truck, there are pump system and pipeline, reasonable structure. Easily operate all meters and operate-switch. | |||||
Special Parts Parameter |
Fire Pump | Type | Normal pressure fire pump | |||
Model | CB10/60 | |||||
Flux | 60L/S | |||||
Pressure | 1.0Mpa | |||||
Fire Monitor | Type | For water and foam | ||||
Model | PL48 | |||||
Flux | 48L/S | |||||
Pressure | 1.0Mpa | |||||
Additional drive system | Use sandwich PTO, splashing-type lubricate, can put out fire when driving. | |||||
Additional operation system | PTP operation lever, fire pump valve operation lever, electronic control button,Hand accelerator operation lever and son on | |||||
Additional cooling system | The additional cooling system uses a mandatory water cooling for PTO. Can effectively control the fire truck equipment to extend the service life of equipmentbecause of long hours of continuous work related to the heating | |||||
Additional Electrical system system |
warning light ,warning sirens | |||||
Pump pneumatic control valve switch,Pump speedometer,Electronic level gauge | ||||||
Fire lights, pump room lights, equipment box lights | ||||||
Additional instrumentation |
pressure gauge | |||||
speedometer | ||||||
level gauge | ||||||
vacuum gauge | ||||||
Carriage | Carriage is made of high quality steel and Aluminum embossed sheet | |||||
Rolling shutter door | Light and high quality aluminum alloy rolling shutter door, neatly open and close, good seal, low noise, beauty outside, and with one set lock. | |||||
color | The whole vehicle is red for fire fighting, there are white in the middle of truck in accordance with the whole truck. |