| After-sales Service: | Provided |
|---|---|
| Warranty: | 12 Months |
| Type: | Rescue |
| Certification: | ISO9000, CCC |
| Volume: | 20000L |
| Emission Standard: | Euro 2 |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
| Fire Fighting Truck Specification | ||
| General | Model | CLW5310XFCZZ18 |
| Chassis Brand | SINOTRUK | |
| Wheelbase | 1800+3800+1350 | |
| Overall Dimension | Appro. 11000*2600*3800 (mm) | |
| Max Axles Payload | Appro. 46000 (kg) | |
| Truck Tare Weight (kg) | Appro. 18500 (kg) | |
| Drive Type | 8x4, Right Hand Drive with power assisted steering | |
| Drive Speed | ≥90Km/h | |
| Cab | Type | Double rows of cabin, forward control type, all welded steel cab, adjustable driver seat |
| No of Seats | 2+4 persons, with safety belts | |
| Number of Doors | 4 | |
| Air Conditional | With air conditional | |
| Electric System | 24V | |
| Audio System | FM/AM radio, CD/USB player | |
| Engine | Brand | SINOTRUK |
| Model | WD615.47 | |
| Fuel Type | Diesel Fuel | |
| Emission Standard | Europe II | |
| Type | Water-cooled four-stroke, direct injection, turbocharged & intercooled, High pressure common rail fuel system, cold start. | |
| Nos of Cylinder | 6 | |
| Cylinders Arrangement | In-line | |
| Max Output Power | 273 (kw) | |
| Exhaust | 9726(ml) | |
| Max output power/rated speed | 371/2200 (hp/rpm ) | |
| Max torque/rotate speed | 1500/1100-1600 (N.m/rpm) | |
| Compression Ratio | 17:01 | |
| Bore x Stroke | 126*130mm | |
| Fuel System | Fuel Tank Capacity | 400Ltr |
| Material | Steel fuel tank | |
| Filler Cap | Lockable | |
| Fuel Gauge | Pointer dial type | |
| Fuel Filter | With water separator device | |
| Gear Box | Model | HW19710 |
| Type | Manual | |
| Forward Speeds | 10 | |
| Rear Speeds | 2 | |
| Max Input Torque | 1900N.m | |
| Rated Speed | 2600rpm | |
| Synchronizer | With Synchronizer | |
| Forward Speeds Ratios | 14.36; 10.66; 7.88; 5.82; 4.38; 3.28; 2.44; 1.8; 1.33; 1 | |
| Reverse Speeds Ratios | 14.01; 3.2 | |
| Oil Tank Capacity | 15L | |
| Operating System | Single H operation | |
| Clutch | Type | Single-plate dry diaphragm spring clutch |
| Bridge | NOs of Axle | 4 |
| Front Alex | HF9 drum type | |
| Front axle load-bearing (kg) | 9000*2 | |
| Rear Alex | HC16 | |
| Rear axle load-bearing (kg) | 16000 * 2 | |
| Electric System | Voltage | 24V |
| Braking System | Full air brake system, split pneumatic circuit , parking spring brake acting on rear axles, exhaust brake | |
| Tire | Type | 12.00R20 |
| Nos | Total 11 pieces, including one spare tire | |
| Fire Engines Specification | ||||
| Tank | Water Tank | Capacity | 18000L | |
| Material | Q235 Carbon steel | |||
| Pump | Model | CB10/60 | ||
| Speed Increasing Radio | 1:1.542 | |||
| Max Working Pressure | 1.434MPa | |||
| Max Allowed Input Pressure | 0.4MPa | |||
| Working Condition 1 | Rated Flow | 3600L/min | ||
| Outlet Pressure | 1.0MPa | |||
| Rotate Speed | 4300±50 r/min | |||
| Shaft Power | 102.2kW | |||
| Suction Depth | 3 meters | |||
| Working Condition 2 | Rated Flow | 2400L/min | ||
| Outlet Pressure | 1.3MPa | |||
| Rotate Speed | 4420±50 r/min | |||
| Shaft Power | 105.1kW | |||
| Suction Depth | 3 meters | |||
| Working Condition 3 | Rated Flow | 1800L/min | ||
| Outlet Pressure | 1.0MPa | |||
| Suction Depth | 7 meters | |||
| Water and Foam Monitor | Model | PL60 | ||
| Flow | 60 L/S | |||
| Water Distance | 75 meters | |||
| Working Pressure Range | ≤0.7 MPA | |||
| Pitching Rotation Angle | -30°~ 70° | |||
| Horizontal Swing Angle | 0 ~360° | |||
| PTO | Use sandwich PTO, splashing-type lubricate, can put out fire when driving. | |||
| Carriage | Carriage is made of high quality steel and Aluminum embossed sheet | |||
| Pump room | On the rear or central of truck, there are pump system and pipeline, reasonable structure. Easily operate all meters and operate-switch. | |||
| Rolling Shutter Door | Light and high quality aluminum alloy rolling shutter door, neatly open and close, good seal, low noise, beauty outside, and with one set lock. | |||
| Color | Red color | |||
| Technical Requirement | 1.Fire fighting vehicle is accord with GB7965 Performance requirements and test methods for fire fighting vehicle. 2.Tank of foam and water is accord with GB39.5 General Specification for fire fighting vehicle. 3.The outside is very beautiful, the surface roughness is accord with GB39.5 General Specification for fire fighting vehicle. 4.All operating switch and meter is accord with standard nameplate. |
|||
Phoebe
Sales Department
CHENGLI SPECIAL AUTOMOBILE CO.,LTD.
Add: Chengli Automobile Industry Park, Suizhou, Hubei, China
Water Tanker Fire Fighting Truck Firefighting Engine Airport Fire Truck
SINOTRUK 20000L Fire Truck Water Tank and Foam Tank Firefighting Truck
Water Tanker Fire Fighting Truck Firefighting Engine Airport Fire Vehicle
SINOTRUK 20CBM Fire Truck Water Tank and Foam Tank Firefighting Vehicle
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}